中山市元龙贸易有限公司供应loctite417 乐泰417中山珠海江门佛山深圳

loctite417 乐泰417中山珠海江门佛山深圳PRODUCT DESCRIPTION
LOCTITE® 417 provides the following product characteristics:
Technology Cyanoacrylate
Chemical Type Plasticized ethyl cyanoacrylate
Appearance (uncured) Transparent, colorless to
slightly yellow liquidLMS
Components One part - requires no mixing
Viscosity Very low
Cure Humidity
Application Temporary bonding
Key Substrates Metals and Glass
LOCTITE® 417 is designed for temporary bonding applications.
It is a low strength product used in applications where
minimum adhesion is required. Bonded parts can be debonded
ultrasonically by immersion in detergent solution; by heat or, in
some cases, by impact.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.05
Viscosity, Cone & Plate, mPa·s (cP):
Temperature: 25 °C, Shear Rate: 3,000 s-1 3 to 8LMS
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Under normal conditions, the atmospheric moisture initiates the
curing process. Although full functional strength is developed
in a relatively short time, curing continues for at least 24 hours.
The rate of cure will depend on the substrate used, on the
ambient relative humidity and on the bond line gap. Higher
relative humidity levels result in more rapid speed of cure. Thin
bond lines result in high cure speeds; increasing the bond gap
will decrease the rate of cure.